SHIPFLOW training, GOTHENBURG September 18 to 19, 2014
Come and learn how to best use the SHIPFLOW Software Package!
SHIPFLOW Basic Training
Schedule:
Time |
Thursday 18 September |
| 10:00 | Introduction to SHIPFLOW Demonstration |
| User interface Geometry import T1.1-3 Configuration Execution Post-processing |
|
| Project management File structure Import of results, offsets and configurations T1.4 Parameters, variants, design engines |
|
| 12:00 | Lunch |
| 13:00 | XPAN - potential flow Wave resistance T2.1-2 Dynamic sinkage & trim Automatic/manual panellization T2.3 |
| Optimization of wave resistance | |
| XBOUND - boundary layer Streamlines Frictional resistance |
|
| 17:00 | Closing |
Time |
Friday 19 September 2014 |
| 09:00 | XCHAP - viscous flow Introducation Demonstration |
| Resistance and wake Automatic grid generation Post-processing |
|
| 12:00 | Lunch |
| 13:00 | Double model / free surface flow Grid customization |
| Appendages Adding a rudder |
|
| Self propulsion | |
| Optimization of performance | |
| 17:00 | Closing |
The latest developments of SHIPFLOW are included in the recently released SHIPFLOW 5.2.
The training is included in the maintenance and support program. This means that any licensee that has valid maintenance is welcome to send two people to the training free of charge.
The course fee for participants that are not part of our maintenance and support program is 7 000 SEK.
Training material, necessary software and licenses, coffee/tee brakes and lunches are included.
The training will be held at the Flowtech office. Please see our location page for map and instructions.
Each participant will need to bring one laptop to do the training exercises with. Preferably a 64bit computer with either Windows or Linux operating system.
If you are interested in participating please write an e-mail to info@flowtech.se stating the name, e-mail address and phone number of the trainee.
To register please e-mail info@flowtech.se